Get to Know Parts of a Car Air Conditioner
It is always important to know the parts of a car air conditioner. Naturally because by knowing all the parts, you can do a little inspection in case of damage. We all know that an air conditioner works to convert refrigerant into cool air that blows into your car cabin. Having a long trip without a well-working car air conditioner is surely uncomfortable. Here are all the parts that you need to recognize in your car air conditioner.
Do you know all the Parts of a Car air conditioner? Get to know them so you can easily spot Damage in the Future
- Compressor
The compressor is the first on the line. It works to pump and distribute Freon to other parts of the air conditioner system in the car. When it is first distributed, it will be in the form of high-pressure gas. Besides the compressor, there is also a compressor clutch. If the compressor itself is connected to the crankshaft, then the clutch is the one providing the electricity that drives the compressor.
When a car AC compressor not turning on – auto ac compressor not turning on, it is most likely that there is a problem with the electric system. The magnetic spool in the compressor clutch could be malfunctioning, so the compressor can’t suck in any Freon and deliver it to other parts.
- Condenser
After getting the high-pressure Freon gas, the condenser will transform this gas into a high-pressure liquid. The condenser pipe is curved and equipped with fins. It is also equipped with a fan to help the heat absorption process. All of these parts need to be cleaned periodically so that they can work smoothly all the time.
- Pressure Switch
If you think that the car air conditioner doesn’t have a safety function, then you are completely wrong. The pressure switch controls
the work of the compressor by adjusting the performance of Freon gas. Inside it is a liquid sensor that works automatically according to Freon’s gas pressure and engine temperature.
- Filter Drier
Dirt and dust are inevitable. That’s why you got a filter drier as one of the parts of a car air conditioner. Its main objective is to filter dirt, dust, and even water that the Freon carried all the way from the compressor. Any water should immediately be removed since it could freeze inside the expansion pipe and create a problem for the AC system. It is also a temporary storage for liquid Freon.
- Evaporator
Evaporator works to absorb additional heat that the Freon carries while passing through the expansion valve. Among other components of car air conditioners, an evaporator is most likely to have a leakage problem.
- Ventilation Blower
Located under the car’s dashboard and in the top middle of the car’s cabin, this component works to blow Freon and air throughout the car cabin. To keep your air conditioner always cold, you need to clean this part often. Easily take a brush and brush off any dirt.
- Expansion Valve
The last component of a car air conditioner is the expansion valve. It will change back the liquid Freon to its initial form, which is gas. It also helps regulate the amount of Freon that flows. It is a small channel between the filter dryer and the evaporator.
That is all the parts of a car air conditioner. Now you know whom to blame if your car air conditioner is not working properly. All of these components work in sync to produce cool wind that blows throughout the car. You can easily tell if one component broke down, it will affect the others. Most of the time you could tell by hearing the sounds or by the hot air instead of the cool wind.